Posted on: November 22, 2020
Weighs quantities of raw materials for use in manufacturing of
high quality printing ink by performing any or all of these duties
RELATIONSHIPS: Responsible to report to the Supervisor for
performance of assigned functions.
Pay Rate for this Job is $16/Hour
ESSENTIAL DUTIES & RESPONSIBILITIES: Include the following, and,
the performance of other assignments or duties, as determined by
Weighs batches as planned and assigned by the Supervisor using
personal protective equipment (gloves, apron, glasses, dust mask,
etc.), if required.
Follows the directions on the batch ticket, taking batch tickets
back to the lab for inspection when there appears to be an
Selects the proper mixing tub for the batch (size and previous
color) and makes sure it is clean.
Checks the raw material inventories to be sure that all ingredients
for the batch are available before beginning to weigh the batch.
Notifies Supervisor of any unusual differences in raw material. If
appropriate, checks the manufacture date and checks for
Uses the proper scale for weighing the raw materials.
Shows all figures on the batch tickets, including lot numbers, of
all raw materials and checks items off as they are weighed so that
steps can be retraced if necessary.
When batch has been weighed, signs batch ticket, marks the tub with
the full formula number, and moves finished batch to proper area
(mill or mixing room).
OTHER JOB REQUIREMENTS--
Operates heater jacket if needed for photo initiator batches.
Keeps all tools and equipment in working order, notifying the
Supervisor of any defective equipment. Keeps work area, tools and
Is responsible for adherence to the INX Employee Handbook and INX's
Standards of Conduct.
Must be committed to a high standard of Environment, Health &
Safety practices and be willing and able to comply with all EHS
laws and all of the employer's EHS policies and rules and must be
willing to report EHS violations and potential EHS violations to
appropriate supervisory or management personnel. This may include
participation in company EHS programs such as safety committees &
required environmental regulatory plans.
It is the responsibility of all INX International employees to
adhere to the guidelines established in the INX Quality Management
System. These guidelines are based on the ISO Standard and can be
found in the Level I INX Quality Manual and the Level II INX
Quality Procedure Manual located on the Prism eSolutions website.
Work area and environment will be maintained according to the 5S
guidelines and the 5S Best Practices at the respective
Must be committed to participation in TPM activities of the
facility at the team level or above with a clear understanding of
all KPI targets for their team or department. Must be committed to
supporting the TPM activities of all pillars as they are deployed
and maintained in their work area or department.
QUALIFICATIONS Could vary depending on product line and
To perform this job successfully, an individual must be able to
perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge,
skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with
disabilities to perform the essential functions.
EDUCATION AND EXPERIENCE:
Preferred: High school diploma or general education degree (GED);
or 1 to 3 months related experience and/or training; of combination
of equivalent education and experience; previous manufacturing
LANGUAGE SKILLS: Ability to comprehend simple verbal/written
instructions and memos; write simple correspondence; present
information in one-on-one and small group situations.
MATHEMATICAL SKILLS: Add, subtract, multiply, and divide, using
fractions and decimals; compute rate, ratio, percents, and
REASONING ABILITY: Apply common sense understanding to carry out
detailed written, oral, or diagram instructions; deal with problems
involving several variables in standard situations.
CERTIFICATES, LICENSES, REGISTRATIONS: Forklift.
OTHER SKILLS & ABILITIES:
Mechanical skills helpful.
Excellent oral and written communication skills.
Must maintain regular and acceptable attendance at such level as is
determined in the employer's sole discretion.
Standing, walking, and reaching 2/3 of the time or more.
Frequent lifting of up to 50 pounds.
Close vision, distance vision, color vision, peripheral vision, and
Sometimes needs to talk or hear; uses hands to handle or feel.
May need to stoop, kneel, crouch, or crawl.
Must not pose a direct threat or significant risk of substantial
harm to the safety or health of himself/herself or others.
Working near moving mechanical parts.
Sound level is typically loud.
Exposure to fumes or airborne particles.
Occasional work in high places.
Must be flexible with their work schedule, good with communication
and math skills. Start time is 10:00am-6:30pm to start but if we
need to switch it could be 7:00am - 3:30pm.
A criminal background check may be required. Criminal convictions
do not necessarily disqualify an applicant from consideration for a
position. An individual assessment of an applicant's prior criminal
convictions will be made before excluding an applicant from
We will consider for employment qualified applicants with criminal
histories in a manner consistent with the requirements of the Los
Angeles Fair Chance Ordinance No. 184652. If you need more
information, or wish to report violation of this ordinance, please
contact the Department of Public Works (DAA), Bureau of Contract
Administration. PandoLogic.Category: General
Keywords: PeopleReady, Whittier , Batch Weigher, Other , Whittier, California
Didn't find what you're looking for? Search again!